| TheWoodcrafter.net |
 Copyright © 2004. |
| My Basic Projects |
| The Retro Section |
| Jr. Woodcrafter |
| My Work |
| Detailed Plans |
| About |
| Lathe Work |
| Safety |
| Hints |
| Pic Gallery |
| Links |
| Search |
| Home |
| Birdhouses |
| Guest Book |
| Contact Us |
|
|
||||||||
|
Here is the original article from the
July - August 1956 Deltagram
ROCKWELL MANUFACTURING COMPANY - A DELTACRAFT PULICATION
 Picture #1 A cutting block that will come in very handy in any kitchen. To prevent the top from warping glue two pieces of solid stock with a piece of plywood in between (see drawing). Turn the feet on the lathe with a ¾-inch dowel portion to fasten them to the top. Sand smooth but do not apply any finish on the cutting surface. Shellac and varnish the sides of the top and legs. |
 Picture #2 **** NOTE **** Mineral Oil is the ONLY truly acceptable finish to treat the cutting surface with. |
 Drawing #1 |
|
| Right-click here to download the drawing as an Adobe Acrobat (pdf) file. |
| * * * * Click on the drawings above to download a higher resolution picture. * * * * |
*********** WARNING***********
Read my page on safety before building this item.